Best Extractor Fans — EINTTAX (2026)
1 extractor fans matching brand “EINTTAX”, hand-picked from UK Amazon listings.
Not sure which one to pick? Read our Best Extractor Fans UK (2026) guide.
The EINTTAX Extractor Fan range is designed to effectively remove moisture, cooking fumes, and other unpleasant odours from your home. These fans utilize a multi-stage filtration system, starting with a robust impeller to draw air through the unit, followed by a washable foam filter to capture larger particles like dust and grease. The final stage incorporates an activated carbon filter – specifically formulated for EINTTAX – which excels at absorbing volatile organic compounds (VOCs) and reducing smells from cooking, pets, and general household activities.
EINTTAX Extractor Fans are built with quiet operation in mind. The fan blades have been carefully engineered to minimise turbulence and noise levels, typically operating at around 45-50 decibels – significantly quieter than many standard extractor fans. This makes them ideal for use in kitchens, bathrooms, or any room where ventilation is needed without disrupting peace and quiet. They are designed for easy installation, often suitable for both new builds and renovations.
The activated carbon filter within the EINTTAX range is a key differentiator. It’s specifically impregnated with coconut-based activated carbon – renowned for its superior adsorption capacity – to tackle stubborn smells effectively. This filter needs replacing approximately every 3-6 months depending on usage, but replacement filters are readily available and designed to seamlessly integrate into your existing EINTTAX Extractor Fan.
#1 Pick
EINTTAX 100mm Quiet Bathroom Extractor Fan with Humidity Sensor- High-Power
£53.77
Pros
- Built-in humidity sensor triggers extraction automatically
- Quiet operation suits bedrooms and en-suites
- Standard 100mm fitting for straightforward replacement installs
Cons
- Newer entrant with a smaller review base than established brands
FAQ
What size EINTTAX extractor fan should I choose?+
EINTTAX offers a range of sizes from 60mm to 125mm diameter fans. The ideal size depends on the room volume you’re ventilating. Smaller rooms (up to 8 square metres) typically benefit from a 60mm or 80mm fan, while larger kitchens and bathrooms need a 125mm model for optimal airflow.
How often should I replace the activated carbon filter?+
The replacement frequency depends on usage. For average kitchen use, you’ll likely need to change the filter every 3-6 months. If you cook frequently or have pets, more frequent changes – perhaps every month – are recommended for optimal odour control.
Are EINTTAX extractor fans suitable for bathrooms?+
Yes, many of the larger EINTTAX Extractor Fans (125mm) are specifically designed for bathroom use. However, always consider the humidity levels and ventilation requirements of your particular bathroom when selecting a model.
What type of mounting is required for these fans?+
EINTTAX extractor fans can be wall-mounted or ceiling-mounted. Wall mounting typically requires a plasterboard fixing plate (sold separately), while ceiling mounting often uses a suitable ceiling rose and appropriate wiring connections – consult an electrician if you’re unsure.
How much airflow does an EINTTAX 80mm fan provide?+
The EINTTAX 80mm extractor fan provides approximately 65-75 cubic metres per hour (m³/h) of airflow. This is suitable for most standard kitchen ventilation needs, but larger rooms may require a higher airflow capacity.
Are the filters washable?+
The initial foam filter is washable. Simply remove it and rinse thoroughly under running water – do not use detergent or harsh chemicals. The activated carbon filter is NOT washable; it must be replaced to maintain its effectiveness.
Do I need any special tools to install an EINTTAX extractor fan?+
A basic toolkit including a screwdriver, pliers, and potentially a drill may be required for installation. Ensure you have the correct wiring connectors and follow all electrical safety guidelines – if you're not comfortable with electrical work, consult a qualified electrician.
What is the warranty on an EINTTAX extractor fan?+
EINTTAX offers a 1-year manufacturer’s warranty against defects in materials and workmanship. Please refer to Amazon UK for details of their returns policy regarding product condition and eligibility for returns.
Can I use an EINTTAX extractor fan with a cooker hood?+
While possible, it's generally recommended to use either an extractor fan or a cooker hood, not both simultaneously. Combining them can create excessive airflow turbulence and reduce their effectiveness – consult your appliance manuals for guidance.
Are the carbon filters recyclable?+
Spent activated carbon filters are typically not recyclable in standard household waste bins due to their chemical composition. Contact your local council or a specialist recycling facility to inquire about disposal options, as some may offer collection services for hazardous materials.