Best Roofing Materials — 5m x 1m (2026)
1 roofing materials matching size “5m x 1m”, hand-picked from UK Amazon listings.
Not sure which one to pick? Read our Best Roofing Materials UK (2026) guide.
#1 Pick
Standard Grade Shed Roof Felt Black Mineral 16.4 x 3.2ft (5m x 1m) - Durable, Long-Lasting Heavy-Duty Roofing Felt, Weatherproof Roof Covering for Summerhouses, Sheds, Kennels- Mineral Felt
- 5m x 1m
Currently unavailable
Pros
- Mineral-finished top layer gives good UV and weather resistance
- Compact 5m x 1m roll suits smaller sheds and summerhouse roofs
- Well reviewed with over 600 verified ratings
Cons
- Standard grade has a shorter life expectancy than polyester-reinforced felt
This listing focuses on roofing materials specifically sized at 5 metres by 1 metre. These materials are designed for projects requiring a precise length and width, offering a tailored solution compared to standard roll sizes. They’re commonly used in smaller extensions, garage roofs, or as supplementary sections within larger roofing schemes. Careful consideration of weather conditions is vital when installing these materials; ensure adequate overlap and secure fastening methods are employed to maintain structural integrity and prevent water ingress.
FAQ
What type of roof is this suitable for?
These 5m x 1m roofing materials are best suited for pitched roofs, particularly those with a relatively low slope. They're commonly used in gable ends or smaller sections requiring a specific dimension.
Are these materials easy to cut and fit?
While reasonably straightforward, precise cutting is recommended using appropriate tools such as a specialist roofing knife. Careful planning of the roof layout and accurate measurements are crucial for efficient installation.
What kind of weather conditions should I consider when installing?
Due to their smaller size, these materials are more susceptible to damage from extreme weather. Protect them from prolonged exposure to direct sunlight, heavy rain, or strong winds during storage and installation. Securely fasten the roofing before any significant weather events.
What tools will I need for this project?
You’ll need a measuring tape, utility knife suitable for roofing materials, a hammer, nails or screws appropriate for the material, and potentially a saw depending on your cutting needs.
How should I overlap these materials?
Overlapping is critical to prevent leaks. Generally, you should aim for an overlap of at least 150mm – 200mm over the previous course, ensuring continuous coverage and a robust seal against water penetration.
What’s the typical lifespan of these materials?
The expected lifespan depends on the quality of the product and correct installation. With proper maintenance and protection from the elements, these roofing materials can typically last for 20-30 years.
Are there any specific adhesives I should use?
While not always necessary, applying a suitable waterproof adhesive to the overlapping seams will provide an extra layer of security against water ingress. Ensure the adhesive is compatible with the roofing material you’re using.
What are the common materials these come in?
These 5m x 1m sections are frequently available in felt, bitumen or PVC, each offering varying levels of weather resistance and durability. Consider your local climate when choosing a specific material type.
How much waste should I expect to generate?
The amount of waste will depend on the cuts you make during installation but it's generally minimal with careful planning. Accurate measurements are key to minimizing scrap.
Can these materials be used for flat roof applications?
While technically possible, using 5m x 1m sections for flat roofs is not recommended. They’re designed for pitched roofs and require a different installation approach to ensure proper water shedding.