Best Monitor Arms & Laptop Stands — Mid-range (2026)

Pros

• Supports large ultrawide monitors up to 42 inches
• Gas spring gives smooth height adjustment
• Tilt, swivel and 360° rotation for landscape or portrait

Cons

• Clamp needs a fairly deep desk edge

Pros

• Affordable way to free up desk space with dual screens
• Full motion tilt, swivel and rotate adjustment
• Standard VESA compatibility fits most monitors

Cons

• Lower weight capacity than premium gas-spring arms

Pros

• Laptop tray lets you run a monitor and notebook side by side
• Tool-free height and angle adjustment
• Clamp and grommet mounting options included

Cons

• Laptop tray adds bulk versus a single monitor arm

Pros

• Tool-free adjustment makes setup quick
• Frees up desk space by lifting the monitor off the surface
• C-clamp and grommet base options fit most desks

Cons

• Single-arm design suits one monitor only

Pros

• Adjustable gas spring tension suits a range of monitor weights
• Mounts two monitors side by side to free up desk space
• Standard VESA mounting fits most screens

Cons

• Clamp needs a fairly sturdy desk edge for dual screens

Pros

• Supports large screens up to 34 inches and 8kg
• 360° rotation suits both landscape and portrait use
• Straightforward, tool-light installation

Cons

• Single-arm design suits one monitor only

Pros

• Freestanding desk mount needs no drilling or clamping strength
• Height, tilt, swivel and rotation adjustment on both arms
• VESA 75/100 fits the vast majority of monitors

Cons

• Base takes up a little more desk footprint than clamp arms

Pros

• Gas spring lift makes height adjustment effortless
• C-clamp or grommet base fits most desk edges
• Frees up desk space for screens up to 30 inches

Cons

• Single-arm design suits one monitor only

Pros

• Supports two monitors up to 32 inches on one sturdy base
• Gas-spring arms make height and angle adjustment effortless
• One of the best-selling dual arms on Amazon UK

Cons

• Needs a fair amount of desk depth for the clamp mount

Pros

• Gas spring arm gives smooth, tool-free height adjustment
• Full motion tilt, swivel and rotate for ergonomic positioning
• Strong review base with a high average rating

Cons

• Desk clamp needs at least 8cm of clear edge to mount

Pros

• Supports large 24-38 inch flat or curved screens up to 12kg
• Gas spring arm gives smooth tilt, swivel and rotation
• Built-in cable management keeps desk cables tidy

Cons

• Not suited to smaller sub-24 inch monitors

Pros

• Compatibility - Single monitor mount fitting most screens 13" to 32" in size and 10 kg in weight with 75x75mm or 100x100mm backside mounting holes. The vented tray holds laptops up to 17". Mounts to your desk (up to 10.2 cm thick) with heavy-duty C-clamp or optional grommet mount.
• Full Articulation - Adjustable arm offers +15° to -15° tilt, 180° swivel, 360° rotation, and height adjustment along the center pole. The monitor can be placed in portrait or landscape orientation.
• Integrated Cable Management - Keep your power and AV cables clean and organized with detachable cable clips on the arms and center pole.
• Easy Installation - Mounting your monitor is a simple process with detachable VESA plates. We provide all the necessary tools and hardware for easy assembly.

Cons

• No built-in monitor included.
• Laptop size compatibility limited to 17 inches.

Pros

• ADJUSTABLE TO CREATE OPTIMAL VIEWING ANGLES: This monitor stand dual is adjustable, both in height and in the angle of the VESA heads. The VESA head on the vertical monitor mounts can move up/down, left/right by 180°, and rotate 360° allowing you to view your monitors vertically or horizontally. The Laptop holder can also be adjusted up and down to find your perfect working angle.

Cons

• No built-in cable management.

Pros

• 1. Laptop arm suitable for 13-17 inch monitors (with pads) and 17-32 inches (without pads), with a load range of 2 to 9 kg, VESA 75 x 75 and 100 x 100 mm
• 2. Allow +85° to -30° screen tilt adjustment, 360° rotation for landscape or portrait mode, upright lift 10 inch (260 mm), max horizontal extension 22.1 inch (560mm) and +90 to -90 degrees swivel angle, hold your monitors with an unparalleled range of motion
• 3. Use a robot arm to adjust the monitor (height and angle) to adapt to our posture, reduce discomfort in the spine, neck and shoulders caused by long-term work, and gradually improve our overall health
• 4. Display stand also equipped with cable management function - The cable ducts can be wired to ensure the organisation and protection of cables, save desk space and reduce clutter

Cons

• Lack of specific model compatibility details.
• No mention of weight capacity limitations for certain monitors.

Pros

• Universal Size: Monitor arm with laptop tray fit for 13-32 inch LCD LED Screens, the max.load is 10kg of each arm. VESA holes of both 75x75mm and 100x100mm. The Laptop tray 355x297mm. Suitable for most laptops, the laptop tray is detachable, can accommodate 2 monitors after removing the tray.
• Strong Flexibility: Easy height adjustment, rotate 360°, tilt ±90° up and down, swivel ±90° left and right. Each arm has 3 pivot points. That is perfectly fit for a reading viewing angle and still remain stable at any perspective.
• Two Installation Methods: It supports both c clamp and grommeting mounting. The desktop supports a thickness of up to 80 mm, suitable for different desktops.
• Saving More Desktop Space: Compared to a vertical monitor stand with heavy-duty base, the c-clamp or grommet mounting of the monitor desk mount will save more than 80% desktop space. You can place accessories such as a large keyboard and mouse pad without worrying about lack of desk space.

Cons

• Limited laptop tray for only two monitors.
• Heavy load limit of 10kg per arm.